Resolutions 2014

Happy New Year to everyone, I hope 2014 is a good one for you all. We had a wonderful Christmas and New Year with our son and shared his first festivities with family.

11731385443_e0becf9cbd_b.jpg

Another year and another set of resolutions. I've been making them since 2010 when I resolved to get back into a form of art, something that I had left behind in the late nineties. That was when photography raised it's head again. Since then I have made resolutions that tie into photography to direct what I'm doing, except for last year when becoming a Father seemed like a big enough challenge to set myself. 2014 is here now and I've been thinking lots about what I want to achieve in photography.

6684422189_7fcca9c0f1_b.jpg

Looking at 2013, my first resolution has to be to shoot more - it might seem like a simple resolution but, outside of my DSLR, I really didn't shoot much at all. I made a large format pinhole camera but never really experimented with it, I was out in the field with the Bronica medium format camera but the majority of those rolls still lie undeveloped, and I made cameras to create solargraphs which I have just had the results back from. I need to get these cameras out and working, and make sure the film is developed.

What I never shot a lot of last year was 35mm. I was put off after using my Nikon F60 last Christmas and then again during our trip to London. This demand has now passed since I have a DSLR so I'm going to take my favourite 35mm camera - the Pentax SP500 - and my favourite film stock - Ilford Delta 100 - and start carrying it around in my bag as well as capturing my family.

7168805207_fce438d077_b.jpg

Next up, I want to print more. Nearly two years ago I searched Gumtree looking for an enlarger that I could use to print at home. Eventually I found what I was looking for and after a 150 mile roadtrip to north of Aberdeen, I had what I wanted and lots, lots more. For the small sum of £40 I had a 75% of a darkroom and a plethora of photography books. Scouting eBay got me the rest of what I needed and I was ready to go. What I soon found was that setting up a temporary darkroom is quite a task and it took me a few attempts to get it down to a reasonable time. The truth is, it was a hassle to do and maybe one day I will be able set it all up permanently in my house.

At Christmas I decided to make a print for my wife and used my local darkroom, Stills, instead. This proved to be a quicker and far more productive time in the darkroom and I would like to do more of it.

So those are my resolutions for 2014 - shoot and print. As I said, they may seem like simple resolutions but I really want to get back into the flow of creating images and that doesn't need to be complicated

Let me know your resolutions.

 

 

Making a Solargraphy Camera

Before every summer solstice I aim to make myself a pinhole camera to start a six month solargraph and each year I fail by forgetting. Not this year. I found the perfect tins for this after a couple of presents were finished off at Christmas - Fortnum & Mason Christmas blend coffee and Lemon Curd biscuits. I love them. I hid the tins away until last week when I brought them out to begin the project.

If you're unsure, a solargraph is a image that is made with a pinhole camera. The camera of loaded with photo paper and pointed in the direction that the sun moves across the sky for a long period of time - from days to years. As the days pass, the image is imprinted onto the paper (viewable without chemicals) and maps the sun's movements through the sky getting lower or higher each day.  Typically you can do this between the summer and winter solstices to capture the sun's highest point to it's lowest point.

DSC_0650.jpg

The tins I am using both take a 7x5" piece of photo paper nicely - one portrait and one landscape. I'm using Ilford's Multigrade Art paper by Hahnemuehle which I've had for a while and one of my favourite papers. You'll also need duct tape or electrical tape (duct tape preferably but I didn't have any), a knife, an empty drinks can, a needle, and - depending on where you're loading the paper - a dark bag.

DSC_0653.jpg

Due to the thickness of the tins, I had to drill a hole 8mm wide into the middle of each of them as trying to force a needle through them wasn't going to work. Don't put too much pressure on the drill either, as it will bend the tin creating a slight lip. I managed to bend it slightly but, with some persuasion with the end of the Stanley knife being used as a hammer, I bent the lip back.

Cut a piece of the empty drinks can big enough to cover the hole you drilled. With a needle, make a hole in the middle of the cut metal. I used a small needle but there was no calculation to get the perfect needle size - any needle will do. I then taped the piece of metal to the tin ensuring to get the pinhole in the approximate middle of the drilled hole.

DSC_0668.jpg

Normally I would have put lightproof tape on the back of the cut metal with the pinhole in it but I forgot. Doing this would have stopped any direct light leaking in that wasn't coming through the pinhole. Instead I taped up to the pinhole leaving a millimetre or so I didn't obstruct the view.

DSC_0669.jpg

Put the tin and your photo paper box into a dark bag or move into a darken room to load the paper into the tin. Complete darkness probably isn't necessary for the piece of paper you are using due to the few seconds it will be exposed but you don't want to ruin the rest of your paper.

DSC_0671.jpg

Finally, screw/push the lids on and make sure you cut a piece of tape to go over the pinhole as a shutter before removing from the bag. 

DSC_0673.jpg

Tape the lids closed and you're ready. To be extra careful, I then attacked the tins with tape and covered every part of them (minus the pinhole/shutter) to block out any unwanted light. The only thing left to do is find your location to install them.

Make sure you attach them to something that won't move and where no one will disturb them. I have put one outside my house since I know I won't and another at my office. I've told people what it is so that it is not confused with anything else or treated as suspicious.

Enjoy and I'll update you in 6 months.